오늘하루 열지않기

전체상품목록 바로가기

본문 바로가기


현재 위치
  1. 촬영용 드론
  2. 레이싱드론
  3. 플라이트콘트롤러
공급사 바로가기
[AirBot] OMNIBUS F4 V5 Flight Controller
품절

[AirBot] OMNIBUS F4 V5 Flight Controller

(해외배송 가능상품)
기본 정보
상품명 [AirBot] OMNIBUS F4 V5 Flight Controller
판매가 38,000원
제조사 AirBot
적립금

무통장 입금 결제190원 (0.5%)

상품코드 P00000ZA
QR코드
qrcode
이미지로 저장코드URL 복사트위터로 보내기
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
[AirBot] OMNIBUS F4 V5 Flight Controller 수량증가 수량감소 38000 (  0)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록
대여서비스

이벤트

The omnibus series of flight controllers are known to be the best all in one integrated flight controller, using the best selection of sensors and parts at a great price and small form factor. Now the latest addition to the series uses the performance STM32 F405 MCU. The omnibus F4 uses the MPU6000/ICM-20608 IMU over SPI for the super fast gyro updates (up to 32Khz) to keep up with the fast F4 MCU, allowing you to run your betaflight/iNav control loop insanely fast. This gives you the extra edge when racing your FPV quadcopter.

The AB7456 OSD chip (an upgraded MAX7456) allows for direct configuration and updates directly within betaflight. This OSD chip uses much less power than the older MAX7456 OSD Chip, but the main benefit is that it can be configured directly within betaflight, no need for an external FTDI, or jumper switches. In addition the omnibus F4 includes a high performance 5V, 1.5A STM L78 voltage regulator which help filter the power and adds voltage protection to the board.

The V5 omnibus includes a current source selection jumper (see pinout below for more details), also the omnibus f4 v5 uses a new 8 pin Sh 1.0 Socket to make connecting a 4in1 ESC much easier. This is compatible with up to 6S batteries.

The V4 omnibus main feature is that the solder jumper to selected between PPM/SBUS is no longer needed. The board also features some minor hardware revisions to increase the boards robustness even more.

The V3 fixes some of the LDO problems of the V2, so now you can power this board directly from your battery (up to 4S Lipo)

Key Features

  • Flight controller designed specifically for betaflight
  • SmartAudio V2 Support, control your VTX power, channel via the airbot OSD (only supported VTX like the TBS Unify Pro)
  • SD card reader so you can log data to your hearts content (need to buy a micro SD card)
  • Solder jumper selector for PPM/SBUS receivers (no need to remove resistors)
  • BMP 280 Baro included as standard, runs on SPI bus
  • Official target within betaflight firmware updater for easy updating (OMNIBUSF4SD)
  • Latest generation STM32 F405 MCU (168Mhz)
  • SPI Sensor MPU6000/ICM-20608 on 75Mhz SPI bus
  • Compatible with both SBUS, PPM and DSMX receivers
  • AB7456 OSD directly configurable via betaflight GUI
  • Compatible with up to 6S batteries.

Specifications

  • STM32 F405 MCU, Runs Betaflight 3.0 firmware
  • SBUS/PPM input (Pinheaders)
  • 6PWM output
  • Only 36x36mm, mount holes 30.5x30.5mm
  • BMP 280 Baro
  • SPI Sensor MPU6000/ICM-20608
  • 128Mbit Flash
  • Powered directly from 2-6S Lipo (v5 only)

Kit Contents

  • 1x Omnibus F4 Flight controller

We do not include nay pin headers with this board, but we do sell them separately, you will also need to get a micro SD card if you want to use blackbox logging.

Zadig Drivers

If you have problems connecting to the board, or uploading new firmware the best fix is to use the zadig driver tool.

  • Push BOOT button on the flight controller.
  • Plug-in the USB cable (the red LED should not be as bright as normally).
  • Fire up Zadig and hit “Options” and then “List All Devices”.
  • From the list choose “STM32 BOOTLOADER”.
  • Under “Driver” choose “WinUSB” on the right and hit “Reinstall Driver”.
  • Omnibus F4 V5 Pinout

The V5 omnibus includes a current source selection jumper (see pinout below for more details), also the omnibus f4 v5 uses a new 8 pin Sh 1.0 Socket to make connecting a 4in1 ESC much easier.



 

Using SBUS/PPM/DSM

There is a known bug with betaflight that can sometimes prevent you from switching between SBUS and PPM. You need to first select serial RX and sbus in the configuration tab, save. Then go turn on serial RX on the UART 6 port in the ports tab and save. Then go back between the two to make sure the settings have been saved correctly as sometimes it does not save properly.

Inverted and non-inverted SBUS

  • SBUS/PPM (J7) header (uart6) This is for inverted signal receivers; has fixed inverter that can not be turned off (by cli command sbus_inverter=on/off)
  • RX1 (on J2) (uart1), These are for non-inverted signal receivers.

Spektrum DSM

  • DSM connector (on J8). This is for non-inverted signal receivers, and is equivalent to RX1.

상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 5,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

    대여 제품은 와이바이 고객센터로 직접 방문하셔서 수령하셔야 합니다.
    방문전 반드시 연락 후 방문해주세요!

    주소 : 서울시 금천구 두산로 70 현대지식산업센터 B동 706호
    고객센터 : 070-4727-2006

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

서비스문의


상품후기 상품의 사용후기를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A 상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기



Quick icons

  • BUTTON
  • BUTTON
  • BUTTON

BANK INFO.

  • 00은행 00000-00-000000
  • 00은행 00000-00-000000
  • 00은행 00000-00-000000
  • 예금주 : 000
팝업닫기
팝업닫기